Original
By certification 
UPS standby power supply series
Description:
Characteristic description
1. Application fields
Standby power supply for:
Communications and telecommunications stations,
Power plant,
Power transmission system,
Computer protection system,
Emergency power supply(EPS),
Uninterruptible power supply (UPS) system,
Radio and broadcasting station & automatic control system
2. Executive standards：
GB/T 19638-2014<< Stationary valve-regulated lead acid battery>>
IEC 60896-21/22:2004 <>
YD/T 799-2010 <> YD/T 1360-2005 <>
3．Integrated Performance:
(1) Green and environment-friendly: the plate made of special alloy, which is environment-friendly. Imported nanoscale fumed silicon is adopted in gel battery; there will no leak of electrolyte even if the case broken, enhance environmental safety.
(2) Low self-discharge: Adopt high purity raw materials, optimized design and technology, the battery not needed charging after storage for over 6 months at room temperature.
(3) High-rate discharge performance: adopting optimized design and low resistance components, make a high discharge efficiency and high rate discharge performance.
(4) Maintenance free: special design for oxygen recombination, make few water loss of electrolyte under normal operating( called oxygen cycle),maintenance of water added is not needed.
(5) High safety: single-track valve with pressure balance, acid fog filter, anti-flaming and anti-explosion function.
(6) Long cycle-life: pseudo-flooded electrolyte without acid stratification in gel electrolyte and anti-corrosion rare-earth alloy; no acid liquor layer, these performances can delay the electrolyte loss and plate corrosion, and enhance the cycle-life.
Description:
Characteristic description
1. Application fields
Standby power supply for:
Communications and telecommunications stations,
Power plant,
Power transmission system,
Computer protection system,
Emergency power supply(EPS),
Uninterruptible power supply (UPS) system,
Radio and broadcasting station & automatic control system
2. Executive standards：
GB/T 19638-2014<< Stationary valve-regulated lead acid battery>>
IEC 60896-21/22:2004 <
YD/T 799-2010 <
3．Integrated Performance:
(1) Green and environment-friendly: the plate made of special alloy, which is environment-friendly. Imported nanoscale fumed silicon is adopted in gel battery; there will no leak of electrolyte even if the case broken, enhance environmental safety.
(2) Low self-discharge: Adopt high purity raw materials, optimized design and technology, the battery not needed charging after storage for over 6 months at room temperature.
(3) High-rate discharge performance: adopting optimized design and low resistance components, make a high discharge efficiency and high rate discharge performance.
(4) Maintenance free: special design for oxygen recombination, make few water loss of electrolyte under normal operating( called oxygen cycle),maintenance of water added is not needed.
(5) High safety: single-track valve with pressure balance, acid fog filter, anti-flaming and anti-explosion function.
(6) Long cycle-life: pseudo-flooded electrolyte without acid stratification in gel electrolyte and anti-corrosion rare-earth alloy; no acid liquor layer, these performances can delay the electrolyte loss and plate corrosion, and enhance the cycle-life.
