MF-680 Extra Fast Clear Coat.

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-12-14 12:35
Browse the number: 90
inquiry
Company Profile
 
 
Product details
GOODSIF Series
Product Name/Model:MF-680 Extra Fast Clear Coat.

Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low
consumption and high efficiency to ensure good profit, suitable for fast spots repair.
Substrates 1K Basecoat.
Mixing Ratio Clear Coat Hardener Thinner
2 1 0.1~0.3
<25℃ 680 Extra Fast Drying
Clear Coat 681 Extra Fast Dry
Hardener 62 Fast Thinner
Spray
Viscosity 14-16s to drop off, in 4# viscosity cup at 25°C,
Pot-Life At 25°C, 1.5 hour.
Re-Treatment There are particles or runs after spray, sand affected area with P2000 sand paper
after thorough drying, then polish to solve the problem.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm ²
Suction Feed: 1.4-1.6mm 4-5kg/cm²
Spray
Technology Coats&Thickness: 2-3 coats, total 25-35um
Flash-Off Time: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time Temperature Dust Free  Tack Free Dry to Handle Dry to Test
25°C  15 minutes  2 hours 4 hours  5 days
70°C 3 minutes 10 minutes  15 minutes  45 minutes
Shelf Life  2 years in original sealed can, cool and dry place at 20℃.
Package 5L×4 or 2.5L×8 or 5L+2.5L+1L
Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering or blushing.
6. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]